Nitrogen Dual Wave Soldering Machine
Nitrogen Dual Wave Soldering Machine is used for PCB DIP chips welding.Automatic welding, high efficiency.
Delivery date:20-25 working days
Packing:Wooden case for export
Trade terms:EXW
Features:
1.The hot air preheating u-shaped heater,long service life,reduce maintenance downtime;
2.Internal reinforcement insulation plus optional external protection device can effectively reduce the heat loss,energy saving up to 20% compare with traditional equipment;
3.Low equipment surface temperature can optimize the working environment;
4.External spray fluxer combined the advantages of inner and independent spray,the spray and machine can be integrated control,no increase in cost;
5. Spray fluxer away from preheating zone,and ensure safety and clean;
6.Transportation of new type titanium alloy heavy duty claw,sectional guide rail design,stainless steel strip supported in guide rail,long life;
7.The solder pot adopts special materials,Anti corrosion coating on surface;
8.Adopt imported precision nozzle,atomization uniformity,high efficient;
9.Nozzle quick released,reduce maintenance time,2 hours to a few minutes;
10.Grid type of mesh,reduce the mesh block by solder fross monthly maintenance extended to six months;
11.Optional solder supply device,reduce the influence of wave height caused by the change of tin solder level.
Details:
Specifications:
Model
|
SMART-610-H
|
Dimensions
|
4445*1742*1735mm
|
Flux Sprayer Dimensions
|
1400*1510*1595mm
|
Power Supply
|
AC 380V,50/60HZ(AC 220V3P,50/60HZ is optional)
|
Initial/Operating Power
|
11.5KW
|
Starting Power
|
64KW
|
PCB size
|
50-610mm
|
Air Source
|
0.5-0.8Mpa
|
Control System
|
PC+PLC
|
Flux Flow
|
10-100ml/min
|
Exhaust Tube Diameter
|
φ200mm
|
Exhaust Mode
|
Upward
|
Preheat Mode
|
IR/Hot Air
|
Preheating zone length
|
2280mm
|
Preheating zone qty
|
4
|
Preheat temp.range
|
Room Temp.-280℃
|
Temp.control mode
|
PID+SSR
|
Solder pot type
|
Mechanical pump
|
Solder capacity
|
800Kgs
|
Wave quantity
|
Dual wave
|
Max.Soldering Temp.
|
Max:300℃
|
Wave Driving Power
|
1/2 HP X1 1HP X1
|
Heat Up Time
|
Approx.120min(set 250℃)
|
Wave Height Control
|
Inverter
|
PCB Conveyor Speed
|
300-1800mm/min
|
Components height
|
Top:120mm,Bottom:25mm
|
Transport height
|
750±20mm(Entrance)
|
Conveyor angle
|
4-7° is adjustable
|
Speed control mode
|
Inverter
|
Cooling method
|
Forced Air Cooling(Option:Chiller)
|
N2 system
|
SMART-610-V2-H-N
|
Nitrogen Consumption
|
15m³/h,below 1000PPM
|
Pressure Nitrogen Source
|
0.5-0.8Mpa
|
Oxygen Nitrogen Source
|
≤10PPM
|
Oxygen Analyzer
|
Optional
|
Leave Message
There are no reviews yet.